Zone Wiring issue

[DLane]

@ThatGuy - what is cut off at the bottom of the picture appears to be an Add-A-Zone device:

Wiring Help - What is this thing?

That is part of an add-a-zone module kit. You will need it! That splits one of your wires to two out in the field. There is another module in a valve box out in the yard somewhere. You’ll need to remember which wire the orange was connected to at the controller. What this means is, a wire went bad and the last irrigator couldn’t find the break and adding a new wire was too costly or a zone valve was added and they used this instead of running a new wire. Here is a link where you can learn abou…

They are normally put in to deal with a broken wire where the location can’t be determined. Therefore zone 4 and 5 are not wire nutted together, but are connected to the Add-A-Module. There should be a corresponding device out in the field.

Can pictures of the current Rachio wiring be posted?

I’d hook Rachio with the Add-A-Zone module just like it was in the Hunter.