Rachio 3 Blinking white 10 times then 1 Red in quadrant 1. Continues endlessly. Not connected to app. Tried rebooting, then reset and now has lost water schedule in memory.

That sounds like a boot error. Check out this link to get assistance on troubleshooting. [image] Light Codes (Rachio 3) Note Controller offline? Having issues with Wi-Fi on your controller? Our new in-app help tool makes Wi-Fi troubleshooting a breeze! Tap the red "Offline" banner at the …

I tried that already. Sill goes back on to a boot error every time.

You may need to replace the unit. I bet it is under warranty and Rachio is awesome about sending replacements, hassle free and quickly.

That was the fix. Just to replace it.

I also have this problem. I got a new Google WiFi mesh router and my Rachio 3 couldn’t be found within the app even though the router was showing the Rachio controller as being connected. The second quadrant was blinking on the Rachio controller. I went through the troubleshooting steps in the Rachi…

Possibly, the power off - discharge - power up sequence will clear your Boot Error 1. See [image] Light Codes (Rachio 3) Note Controller offline? Having issues with Wi-Fi on your controller? Our new in-app help tool makes Wi-Fi troubleshooting a breeze! Tap the red "Offline" banner at th…

Thanks, that’s what I’ve already tried several times with no luck. This last time I left it unplugged for over two hours and held down the button for over a minute to discharge it. Same flashing light codes (quadrant 1 white with 1 red) for the boot error still happening.

Same issue here. I was connected with no issues for the past 2 weeks. Today, it’s offline, and I can connect to the network but then it gets stuck at third bar and blinks red. Any resolution yet?

@scubasteve - Sounds like your issue might be different. If the third quadrant blinks red after it has connected to wifi, it’s probably having trouble connecting to the server. Could be a problem with your ISP or something else between your router and the Rachio servers, or even a Rachio server outa…

Good call, thanks! I’m hoping Rachio can check on their end.

Rachio 3 Blinking white 10 times then 1 Red in quadrant 1

Troubleshooting Tech Support

Stewart April 29, 2020, 5:21pm 7

Possibly, the power off - discharge - power up sequence will clear your Boot Error 1. See