Erroneous low-flow alert


#1

I received the alert below at 8:00 AM today and I believe it is erroneous;

  • Alert time is 8:00 AM. It determined the second the zone started that there was no flow?
  • says 100% below baseline yet it watered 33 gals in 2 minutes and it’s flow is defined as 14.6 GPM. It’s probably right-on if you account for the pressurization ramp-up time.
  • I was sitting on my patio when the zone ran and saw it water.

alert I received:
01%20AM

Zone info:

46%20AM


#2

@crc2004, would it be possible to get a photo of your flow meter installation?


#3

It must have been a one-time glitch, I’ve done further testing and can’t reproduce the problem. This post can be deleted. thanks