Install Rachio 3 replace Rainbird ESP-LX

have just installed the 3. Zones 1-5 work great. When I removed the old head, it looks like zone 7 has two wires and the second zone 7 went to zone 10. My question is: based on the photo is my zone 8 actually a common wire?

Looking at the picture, it looks like on the

  • bottom: two speaker looking wires goes to a rain sensor, the red goes to a Master Valve (or pump), and the white is common
  • top: 1-11 with two wires (zones?) hooked into 7. It seems the black terminals indicate common, but nothing seems to be attached

Did you ever figure this out? I have SAME set up. And I have two wires into 6,7,8 on mine