Just to update this thread. I went ahead and connected the wires just like what have it on my Hunter controller. Everything is working fine so far. Valve Monitoring on the zones where I have 2 wires connected (Zone 4 & 5) shows a higher number than the other zones. I don’t know if it’s good or bad. I will still replace it with a 12-zone Rachio 3 or 16-zone Rachio Pro in the near future. Thanks again for the feedback and comments.
Zone 1 - 155mA | Good
Zone 2 - 155mA | Good
Zone 3 - 161mA | Good
Zone 4 - 284mA | Good
Zone 5 - 294mA | Good
Zone 6 - 161mA | Good
Zone 7 - 158mA | Good
Zone 8 - 158mA | Good
