Three years and still no Gallons per Hour?

Not sure that you live in the desert and use drip extensively. All the water landscape courses teach a method of matching gph to the size of the plant and yes you sometimes have more than one emitter per plant, and then you set the time based on the gph and what is needed for a plant with that size of canopy for that season. All the other calculations are just confusing and have nothing to do with it. By definition a xeroscape watering system concentrates the water only on the plants, not the area - so that just confuses things. You are deliberately not watering the area, but rather just the plant to minimize evaporation and not waste water where you want nothing to grow.

I agree I’m mystified why Rachio will not embrace emitters more fully. Much of the water limited West operates on these principles.

i dont live in a desert, but i use drip to cover 7,000 feet of vegetation so i have a lot of experience.
all in all, i think you just summed up why there is not a solution at this time.

because you are viewing the situation from a single dimension. they could just lay a few boxes into a ui to get the water estimates correct but it will do absolutely NOTHING for a flex schedule. so what everybody is seeing right now is PROPER software design. dont build a house of cards to tactically squash orthogonal user complaints…build a proper scientific computation.

everybody is conflating rachio’s willingness with proper scientific discipline.

1 Like

Doesn’t it depend on implementation? If they took a user-input the gallon displacement number and back calculated a pr that would put out that many gallons, the rest of the algorithm stays the same and flex still does it’s magic. That’s what us desert folk are doing manually right now, and it works great. It’s just figuring out the pr value that’s the confusing part IMHO.

Can you write out the formula? Because I’m missing something. Take your rig and work backwards from their to get what you think your pr is using only gallons, no area

I’m not desert, just Dante’s garden, but I agre with you. Once I backed into what I think is a relatively good PR value, flex daily seems to be working pretty well (outside of my issue with rain predictions that don’t come to fruition, but that’s a totally different problem). It’s figuring out that PR that is hard.

@plainsane I think the confusion is that there is no intent to change the total inches displaced by the Rachio software in it’s calculations. This is just a way to take area out of the process of calculating the PR for a single point emitter, or a few multi-point emitters, when you know how many gallons that you want displaced. Whether you deliver those gallons from 1 emitter or a tree ring becomes inconsequential to the software. Of course as you point out it is certainly better for your vegetation to have a nice ring! I posted a manual procedure here:

Quick Question: What are your AW settings currently at, relative to your Area in “advanced settings?”

Just got Rachio installed recently and I’m trying to dial in my drip line system now … seeing these monster watering times scares me a little…slowly studying all of this to become an official soil engineer, but for now I’d like some feedback to hopefully take advantage of the features we’ve paid for…I think I’m close…

Welcome to the community @rrubino. I’m not sure I understand the question. The AW (Available Water) and Area are completely unrelated parameters. If you haven’t found these two links, I recommend giving them a read to see if they help with what you’re trying to do.

1st - Dialing in your soil:

2nd - Dialing in your drip:

4 Likes

Thank you for those resources … working calculations now…
What do you suggest for “Crop Coefficients” for winter grass? Summer grass?

For shrubs/trees, one challenge i face is having a near-acre of drip line and a fairly wide mix of plants/trees/ground cover. Emitter sizes/qty controls this, but having it on a single zone is not ideal especially when trying to do the math for flex schedules.

my yard is basically 3 main areas: grass (5 zones) dripline(1 zone) and citrus tree bubblers (1 zone)

I’d love to dial all that into flex schedules, but it is scary to see water times of nearly 5 hours for drip and 2 hours for citrus (“how is that SAVING water?” lol) its hard to wrap your head around, but think i am close.

Crop coefficiency is the hard thing right now - that and estimated root depth.
CC for winter grass is currently set to .8 on my system; drip lines are at .55; citrus at .6
Root depth is 30 inch for citrus and 18 inch for drip lines

sound good?

1 Like

I totally agree with Boris on this.

I asked the same thing and was basically told to use the provided formula like a good little boy. I have a rose garden with a 1-gallon / hr emitter on each bush. Since I know that I’d like to give them a gallon of water I just set the system for an hour. Still, my gallons used estimate is all messed up since I know that the system only used 20 gallons.

I don’t see how hard this can be to program. For crying out loud, I’m walking around with a computer in my pocket that’s more powerful that the first desktop I ever owned. So again, I agree with Boris, give me the option to put in the number of emitters and their flow rate in gallons per hour.

1 Like

@mattebury Check the calculator at the link below. It shows how you can use the existing software to get the right watering time AND water usage estimate, given that you know how many gallons that you want to deliver per cycle.

1 Like

OMG, you just don’t get it. I shouldn’t have to do ANYTHING other than select the necessary items in the app. Telling your users to go use this external tool (external to the app) and then come back and type in the results is just ludicrous.

Why the resistance to putting this functionality in the app?

@mattebury Chill. I’m a user trying to help, not a Rachio employee. If you don’t want my help then that’s fine by me.

Sorry, misread your title behind your user name

My apologies for the frustrated tone

That was my point exactly: Rachio is not interested in supporting it’s users. It would be incredibly simple for them to add the functionality but they refuse to. After all, computers are really good at math so why can’t they add this simple function to their software? Why do they absolutely refuse to support anyone other than those with lawns (inch/hour is designed for sprinkler systems, not drip irrigation). The reason is that they are simply not interested.

I had a conversation with their rep and he reiterated to me that 1) they had no interest in supporting my request to add GpM or support drip systems and 2) that they had no interest in allowing user local control over their system.
With Rachio, if the net goes down, your hosed (if you pardon the pun). All commands are stored and issued from their systems, not locally. And there is nothing you can do about it.

My ultimate solution was to dump Rachio altogether. I ended up trying a very good competitor’s controller (not going to give the name but it comes with 8, 12 and 16 zones, and has touch panel control as well as phone app and web control and stores everything locally so if you disconnect from the net it’s still there. I liked it but then my brother showed me his system controlled by a Raspberry Pi which had a lot more features and allowed infinite zones and cost less than any of the other systems (admittedly I had to program it myself).

So now I am Rachio free and my yard is loving it and I have a lot fewer headaches and don’t have to worry about Rachio watching everything I do and changing things without my knowledge or permission.

Cheers

1 Like

Ok, thanks.

Hi Boris-

While I understand everyone’s frustration, I do want everyone to know we are listening to our users, and consider all feedback useful. Something to keep in mind is that while the calculations seem simple, this is something that has to be implemented on three different platforms and be compatible for two different controllers. It also involves a completely different logic in how watering times are evaluated and usage is measured. With all that being said, this is absolutely a request we have heard and the product team has been discussing. Look forward to some big changes coming for next season!

McKynzee :rachio:

3 Likes

Use the default coefficients for warm season and cool season grass. I will let others address your other concerns.

1 Like

What system did you get. I have Rachio for 1.5 years and still no actual gallons per hour per zone. Their total lack of attention to the end user should be punished economically. They don’t want to stay in business.

He says in his post that he used Raspberry Pi.

https://www.amazon.com/gp/aw/d/B01CD5VC92/ref=mp_s_a_1_1?ie=UTF8&qid=1499192404&sr=8-1&pi=AC_SX236_SY340_FMwebp_QL65&keywords=raspberry+pi&dpPl=1&dpID=51696W3Gz%2BL&ref=plSrch