@silverfox9142 I apologize that you received incorrect information. This is a feature we are certainly interested in but there are complexities with detecting leaks when inactive due to the multitude of setups in the market (hoses on line, pool fills, etc).
We are continuing development on the Flow meter but cannot guarantee that this feature will be delivered before you trip. We will be able to protect you from high flow leaks and will notify you if there are any low flow problems.
I will certainly let you know if anything changes with the feature development schedule.
@timber - would the following solve the problem? If there was a spare zone (e.g. only 7 out of 8 or 15 out of 16 zones in use) could that zone be configured on a schedule and calibrated - with no water actually flowing through meter. Then schedule this zone for after the other zones run and if there is a leak that is over the minimum detection level (.5 GPM right??), then it might trigger the high flow alert. The zone shutdown wouldn’t help, but at least there would be notification. Or would a minimum flow value need to be shoved into this zone someway - e.g. by Rachio on the backend or manually open a solenoid on a zone to create just enough flow to be measured for the calibration. This solution might result in low flow messages, but if it was at a known time then that could be a comfort that the system checked and things seem to be OK.
Regarding hoses on line and pool fills, etc. I view those as exceptions and the flow when not running would need to be enabled or disabled and installs with these exceptions would have to disable the warning or live with false positives.
So based on this information am I correct in understanding that this thread which talks about “Inactive System Flow” as a method of leak detection does not apply to the wireless flow meter, only wired flow meters?
As my sprinkler system is aging I occasionally see valve diaphragms failing (spontaneously running zones.) My primary use case for the wireless flow meter was to detect water flow when the system was not actively running any zones, detecting failing valves as well as broken main lines.
Fortunately we are getting close to making this a feature that should be testable next week. It will provide a check post schedule run to look for any water.
This feature will live at the controller level and you can enable or disable based on your use case.
@timber Thank you very much for the update. I am very impressed with you guys and your willingness to add this feature. I will be ordering my Rachio3 and water flow meter this week in anticipation to trying this feature out. Thank you and everyone at Rachio who had a role in making this a reality for me.
I believe this will add tremendous value and functionality to both the flow meter and overall Rachio system. I too look forward to testing it once available.
Thank you for responding to the improvement suggestions of your user base and supporters.
@jwelch649 and @Adrian97c the option is now available for everyone with the latest version of the app. Please check your Flow Settings from the Controller Settings menu for the Inactive Flow Check option.
Did the feature actually get added? As best can tell it still only checks once after a program has run. I’m getting thr inactive warning intermittently after running a program, but I don’t see any evidence of water leaking. It would be great to just ping the flow meter at will to see if it is detecting any flow.
Well, it’s great to see ideas to solve my problem and the desire to solve the problem, too.
